Stihl FS491C-EM Brushcutter
RRP is £1,314.00 (Inc VAT)
Boxing Day Sale Saving Of £287.00
Stihl FS491C-EM Brushcutter Description
The Stihl FS491C-EM clearing saw is a powerful and versatile tool that is ideal for clearing tough grass, brush, and small trees. It is powered by a 2.4 kW 2-MIX engine that provides plenty of power for even the most demanding tasks. The saw also features a large cutting diameter of 520 mm, which makes it ideal for clearing large areas quickly and easily.
The FS491C-EM is also equipped with a number of features that make it comfortable to use for extended periods of time. These features include a 4-point anti-vibration system, an ErgoStart starter, and a multi-function handle. The saw also has a tool-free handle adjustment system that allows you to quickly and easily customize the saw to your individual needs.
Whether you are clearing a path through overgrown vegetation or trimming back small trees, the Stihl FS491C-EM clearing saw is the perfect tool for the job. It is powerful, versatile, and comfortable to use, making it the ideal choice for professional landscapers and homeowners alike.
Stihl FS491C-EM Brushcutter Features
STIHL M-Tronic - This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
STIHL ErgoStart - STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Bike handle - When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
Multi-function handle - The one-hand multi-function handle means you can control your device easily and reliably with one hand. Since all the relevant control elements are integrated in it, the handle is suitable for both right and left-handers.
Manuel fuel pump - With the manual fuel pump, fuel can be pumped into the carburettor at the push of a thumb. It makes starting the machine easier after it has been idle for a long time.
Tool-free handle adjustment - The ergonomic bike handle can be adjusted without tools.Improved anti-vibration system
Improved anti-vibration system - New rubber elements improve the anti-vibration system of the clearing saw, reducing the levels by more than 30% when at low speeds and partial load
Stihl FS491C-EM Brushcutter Specification
Model FS491 C-EM
Displacement 51.6cm3
Power Output 2.4kW / 3.3hp
Weight 9.3kg
Sound Pressure Level 101dB(A)
Sound Power Level 112dB(A)
Vibration Level (L/R) 2.8/2.8m/s2
Total Length without cutting tool 179cm
Standard Cutting Tool Brush knife 300-3
Tank Volume 0.99L
Drive Shaft in Shaft Solid
Stihl Anti Vibration System 4-point
STIHL ErgoStart (E) Yes
Multi-Function Handle Yes
Loop Handle / Bike Handle Bike Handle
Tool-less Handle Adjustment Yes
Harness/Carrying System Yes
Stihl Engine (Mix) 2-MIX
Stihl M-Tronic (M) Yes
Mowing/Shredding/Sawing Jobs Standard - Mowing Jobs / Retrofittable - Shredding & Sawing Jobs
Warranty 2 Years
Stihl FS491C-EM Brushcutter Promotions
Extend your STIHL Warranty on this product by an extra year, when you buy it with a STIHL Smart Connector. We will register this warranty extension for you if you buy, so you don't need to do anything else to extend the cover once bought. For more information please read the details here!
Stihl FS491C-EM Brushcutter Arrange a Consultation
The Stihl FS491C-EM clearing saw is a powerful and versatile tool that is ideal for clearing tough grass, brush, and small trees. It is powered by a 2.4 kW 2-MIX engine that provides plenty of power for even the most demanding tasks. The saw also features a large cutting diameter of 520 mm, which makes it ideal for clearing large areas quickly and easily.
The FS491C-EM is also equipped with a number of features that make it comfortable to use for extended periods of time. These features include a 4-point anti-vibration system, an ErgoStart starter, and a multi-function handle. The saw also has a tool-free handle adjustment system that allows you to quickly and easily customize the saw to your individual needs.
Whether you are clearing a path through overgrown vegetation or trimming back small trees, the Stihl FS491C-EM clearing saw is the perfect tool for the job. It is powerful, versatile, and comfortable to use, making it the ideal choice for professional landscapers and homeowners alike.
STIHL M-Tronic - This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
STIHL ErgoStart - STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Bike handle - When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
Multi-function handle - The one-hand multi-function handle means you can control your device easily and reliably with one hand. Since all the relevant control elements are integrated in it, the handle is suitable for both right and left-handers.
Manuel fuel pump - With the manual fuel pump, fuel can be pumped into the carburettor at the push of a thumb. It makes starting the machine easier after it has been idle for a long time.
Tool-free handle adjustment - The ergonomic bike handle can be adjusted without tools.Improved anti-vibration system
Improved anti-vibration system - New rubber elements improve the anti-vibration system of the clearing saw, reducing the levels by more than 30% when at low speeds and partial load
Model FS491 C-EM
Displacement 51.6cm3
Power Output 2.4kW / 3.3hp
Weight 9.3kg
Sound Pressure Level 101dB(A)
Sound Power Level 112dB(A)
Vibration Level (L/R) 2.8/2.8m/s2
Total Length without cutting tool 179cm
Standard Cutting Tool Brush knife 300-3
Tank Volume 0.99L
Drive Shaft in Shaft Solid
Stihl Anti Vibration System 4-point
STIHL ErgoStart (E) Yes
Multi-Function Handle Yes
Loop Handle / Bike Handle Bike Handle
Tool-less Handle Adjustment Yes
Harness/Carrying System Yes
Stihl Engine (Mix) 2-MIX
Stihl M-Tronic (M) Yes
Mowing/Shredding/Sawing Jobs Standard - Mowing Jobs / Retrofittable - Shredding & Sawing Jobs
Warranty 2 Years
Extend your STIHL Warranty on this product by an extra year, when you buy it with a STIHL Smart Connector. We will register this warranty extension for you if you buy, so you don't need to do anything else to extend the cover once bought. For more information please read the details here!
Shop Online with confidence. Winchester Garden Machinery, a family-run business, are one of the largest retailers of garden machinery in the UK. We have been established for over five decades serving organisations, businesses, and valued customers both in store and online. Our four showrooms are based in the south, but you will experience the same high level of quality of service from our 50+ knowledgeable staff when you shop online or by phone, as you would do in our showrooms.
Fast Delivery
Most products are shipped to be delivered in 2-5 days as standard. Next day service is offered, please check shipping options upon checkout. Larger items, such as Tractors & Chippers will take longer.
Authorised Dealers
We are authorised retailers for all of the equipment we sell including top brands such as Honda, Stihl, Husqvarna, Hayter, Toro and Countax.
Price Promise
A vast majority of our products for sale online have discounts applied so we are always competitive on price. If you feel we are not competitive enough, please contact us and let us know.
Aftersales
As a top retailer we offer expert advice on the machinery we sell, along with servicing and spare parts.
Commitment to Quality
Our friendly and professional staff are available by telephone or email to give expert advice on the best machines to suit your requirements and ensure that you receive the best quality at the right price.