Grillo 10AWD27 38" (97cm) Climber

RRP is £14,541.60 (Inc VAT)

£13,086.00 (Inc VAT)

Christmas Savings Of £1,455.60

Price: £13,086.00 (Inc VAT)
Stock: Out Of Stock

Grillo 10AWD27 38" (97cm) Climber Description

Grillo Climber 10 AWD 27 is a truly unique hydrostatic brush-cutter. Their permanent 4WD system and powerful engines make these machines superb on severe slopes and low-adherence ground. Remarkably efficient on high grass and up to 2,5 cm diametre shrubs, these machines are ideal both for agricultural and professional use. Their compact dimension has been designed to boost their performance on slopes and the Kanzaki hydrostatic transmission with differential lock on the rear wheels allow the operator to work with maximum safety, reliability and unmatched stability under any working condition.

The cutting height adjustment is via a lever with automatic locking of the chosen height position. The cutter deck stops in the chosen position when the lever is released. Blades are engaged via an electric switch located near to the steering wheel and controlled via an electromagnetic clutch fitted with a blade brake. The single-blade cutter deck has a working width of 98 cm. The progressive and assisted cutting height range from 3,5 to a max 13,5 cm, is locked automatically in the chosen position. This 10 cm range allows the operator to easily negotiate kerbs and obstacles and allows them to work on uneven ground. The whole cutting system is always kept parallel to the ground, this ensures top cutting quality even after years of service. The blade is made from special steel and has a low noise profile, the double-cutting tips are retractable in case of impact and can be turned around when one side is worn out. The whole structure of the cutter deck is very robust and remarkably resistant to impacts with stones. The large diameter blade shaft and cutting transmission guarantee reliability even under the most demanding conditions and for many hours in total safety. The cutter deck has two side protection baffles that can be raised to make maintenance and cleaning easier.

Grillo Climber 10 AWD 27 (27 HP Gross) is equipped with a twin-cylinder, four-stroke, (22 HP net) 8270 Commercial B&S petrol engine. This Engine is fitted with a professional air filter especially suitable for dusty environments and very easy to access for routine cleaning, a stainless-steel low-emission silencer, a 13-liter fuel tank with large filler for easier refueling and a built in fuel indicator on the cap. Comfortable controls, the forward control lever enables the operator to choose his exact ground speed. When operating the brake pedal, the rear axle is braked and the forward lever comes back automatically to its stop position. 

Grillo 10AWD27 38" (97cm) Climber Specification

Model Climber 10 AWD 27

Engine 8270 Commercial Turf Series Briggs & Stratton

Power 724 cc, 22hp, 16.2kW

Fuel Petrol 13L

Differntial lock As standard

Speed 0-5.6mph

Turning Radius 70cm / 27.5"

Cutting Height 35cm - 135cm / 1.4" - 5.3"

Cutting Width 38.5" (98cm)

Weight  355kg

Grillo 10AWD27 38" (97cm) Climber Arrange a Consultation

Please fill in your details below and we will contact you as soon as possible to discuss this machine. Please note, due to the size of this machine, we can only deliver it within a certain radius of our branches, so we will discuss this with you. 

Please tell us whereabouts you are based so we can get the relevant branch in touch with you. We have branches based in Winchester(SO22), Liss(GU33) and Sunningdale(GU20). We can only sell this item within a certain radius of our branches.

Grillo 10AWD27 38" (97cm) Climber Delivery Information

All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.

We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.

  • GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
  • AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £200 delivery charge

For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.

Grillo Climber 10 AWD 27 is a truly unique hydrostatic brush-cutter. Their permanent 4WD system and powerful engines make these machines superb on severe slopes and low-adherence ground. Remarkably efficient on high grass and up to 2,5 cm diametre shrubs, these machines are ideal both for agricultural and professional use. Their compact dimension has been designed to boost their performance on slopes and the Kanzaki hydrostatic transmission with differential lock on the rear wheels allow the operator to work with maximum safety, reliability and unmatched stability under any working condition.

The cutting height adjustment is via a lever with automatic locking of the chosen height position. The cutter deck stops in the chosen position when the lever is released. Blades are engaged via an electric switch located near to the steering wheel and controlled via an electromagnetic clutch fitted with a blade brake. The single-blade cutter deck has a working width of 98 cm. The progressive and assisted cutting height range from 3,5 to a max 13,5 cm, is locked automatically in the chosen position. This 10 cm range allows the operator to easily negotiate kerbs and obstacles and allows them to work on uneven ground. The whole cutting system is always kept parallel to the ground, this ensures top cutting quality even after years of service. The blade is made from special steel and has a low noise profile, the double-cutting tips are retractable in case of impact and can be turned around when one side is worn out. The whole structure of the cutter deck is very robust and remarkably resistant to impacts with stones. The large diameter blade shaft and cutting transmission guarantee reliability even under the most demanding conditions and for many hours in total safety. The cutter deck has two side protection baffles that can be raised to make maintenance and cleaning easier.

Grillo Climber 10 AWD 27 (27 HP Gross) is equipped with a twin-cylinder, four-stroke, (22 HP net) 8270 Commercial B&S petrol engine. This Engine is fitted with a professional air filter especially suitable for dusty environments and very easy to access for routine cleaning, a stainless-steel low-emission silencer, a 13-liter fuel tank with large filler for easier refueling and a built in fuel indicator on the cap. Comfortable controls, the forward control lever enables the operator to choose his exact ground speed. When operating the brake pedal, the rear axle is braked and the forward lever comes back automatically to its stop position. 

Model Climber 10 AWD 27

Engine 8270 Commercial Turf Series Briggs & Stratton

Power 724 cc, 22hp, 16.2kW

Fuel Petrol 13L

Differntial lock As standard

Speed 0-5.6mph

Turning Radius 70cm / 27.5"

Cutting Height 35cm - 135cm / 1.4" - 5.3"

Cutting Width 38.5" (98cm)

Weight  355kg

Grillo 10AWD27 38" (97cm) Climber Delivery Information

All tractors, riders and woodchippers are delivered personally by one of our experienced team, therefore we are only able to delivery to you if you are located within one of the postcodes listed at the bottom of this section.

We will contact you to arrange the delivery date, usually within 1-2 working days of order. We need to allow at least 7-10 days for our warehouse to build and PDI most machines and then schedule when a driver is available.

  • GU; PO; RG; SP; SO - Free Of Charge (excluding Isle of Wight)
  • AL; B; BA; BH; BN; BR; BS; CB; CF; CM; CO; CR; CT; CV; DA; DT; DY; E; EC; EN; EX; GL; HA; HP; HR; IG; KT; LU; ME; MK; N; NN; NP; NW; OX; PE; RH; RM; W; SE; SG; SL; SM; SN; SS; SW; TA; TF; TN; TW; UB; WC; WD; WR; WV - £200 delivery charge

For more information on large deliveries, including if you are outside of the above areas, or if you want to arrange collection of your machine, please check the delivery charges page located within the "Useful Links" at the foot of every page.

Shop Online with confidence. Winchester Garden Machinery, a family-run business, are one of the largest retailers of garden machinery in the UK. We have been established for over five decades serving organisations, businesses, and valued customers both in store and online. Our four showrooms are based in the south, but you will experience the same high level of quality of service from our 50+ knowledgeable staff when you shop online or by phone, as you would do in our showrooms.

Fast Delivery

Most products are shipped to be delivered in 2-5 days as standard. Next day service is offered, please check shipping options upon checkout. Larger items, such as Tractors & Chippers will take longer.

Authorised Dealers

We are authorised retailers for all of the equipment we sell including top brands such as Honda, Stihl, Husqvarna, Hayter,  Toro and Countax.

Price Promise

A vast majority of our products for sale online have discounts applied so we are always competitive on price. If you feel we are not competitive enough, please contact us and let us know.

Aftersales

As a top retailer we offer expert advice on the machinery we sell, along with servicing and spare parts.

Commitment to Quality

Our friendly and professional staff are available by telephone or email to give expert advice on the best machines to suit your requirements and ensure that you receive the best quality at the right price.